SEW EURODRIVE put their confidence in the DANOBAT vertical lathe TV-1500 for machining gearmotor´s gears

Today on Lathes 15. Nov, 2013 | by

DANOBAT in his will to solve customer’s problems, analysed jointly with SEW EURODRIVE their problems with the machining of the gearmotor’s gears.

The proposed solution was based on TV-1500 vertical lathes. The TV-1500 vertical turning machine is a machine designed for parts up to Ø1500 and big material removal, with a maximun torque of 40.000 Nm.

The machine was equiped with a turning turret on the right slide and with a electro spindle for grinding operations on the left slide.

Turning turret:

  • Uncontinuous ID hard turning with a hardness of 62 HRC.
  • Upper and lower hard turning of faces.

Electro spindle:

  • Uncontinuous ID grinding.

Before this machine SEW EURODRIVE needed one vertical lathe and one vertical grinding mahine to achieve the required qualities.

Due to the extensive experience in turning and grinding operation of DANOBAT the achieved solution resulted in a high productivity machine with hard turning and grinding in one clamping in one machine.

This marriage between grinding and turning gives the customer a workshop space saving, high geometrical and dimensional accuracy solution with a rugosity below Ra 0,8.

DANOBAT TV vertical lathe

DANOBAT TV vertical lathe

3 Comments in “SEW EURODRIVE put their confidence in the DANOBAT vertical lathe TV-1500 for machining gearmotor´s gears”

  1. Mark Le bois

    26. May, 2014

    These pictures are amazing! I found some more on this website: http://www.directindustry.com/industrial-manufacturer/vertical-lathe-63248.html

    Responder a este comentario
  2. Vertical Machine

    27. Dec, 2014

    Thanks for your post. It is very informative for the viewers, keep it up

    Responder a este comentario
  3. These vertical lathes have been especially designed for automotive, aerospace, railways, bearings and oil & gas industries among others.

    Responder a este comentario

Leave a comment